manualshive.com logo in svg

MARUTI SUZUKI Baleno RS, Owner'S Manual

Discover the ultimate driving experience with the MARUTI SUZUKI Baleno RS. Enhance your understanding of this turbocharged masterpiece by accessing its comprehensive Owner's Manual. Download this essential manual for free from our website and unlock insights into your Baleno RS's features, maintenance tips, and more.

Share
Download
background image

6-1

VEHICLE LOADING AND TOWING

68PH5-74E

Vehicle Loading

Your vehicle was designed for specific

weight capacities. The weight capacities of

your vehicle are indicated by the Gross

Vehicle Weight Rating (GVWR) and the

Permissible maximum Axle Weight (PAW,

front and rear). The GVWR and PAW

(Front and Rear) are listed in the “SPECI-

FICATIONS” section.
GVWR – Maximum permissible overall

weight of the fully loaded vehicle (including

all the occupants, accessories and cargo

plus the trailer nose weight if towing a

trailer).

PAW – (Front and Rear) Maximum permis-

sible weight on an individual axle.

Actual weight of the loaded vehicle and

actual loads at the front and rear axles can

only be determined by weighing the vehi-

cle. Compare these weights to the GVWR

and PAW (Front and Rear). If the gross

vehicle weight or the load on either axle

exceeds these ratings, you must remove

enough weight to bring the load down to

the rated capacity.

Trailer Towing

68PHM6001

Your vehicle was originally designed to

carry people and a normal amount of

cargo, not to tow a trailer.

WARNING

Never overload your vehicle. The

gross vehicle weight (Sum of the

weights of the vehicle, all the occu-

pants, accessories, cargo plus trailer

nose weight if towing a trailer) must

never exceed the Gross Vehicle

Weight Rating (GVWR). In addition,

never distribute a load so that the

weight on either the front or rear axle

exceeds the Permissible maximum

Axle Weight (PAW).

WARNING

Always distribute cargo evenly. To

avoid personal injury or damage to

your vehicle, always secure cargo to

prevent it from shifting if the vehicle

moves suddenly. Place heavier

objects on the floor and as far for-

ward in the cargo area as possible.

Never pile cargo higher than the top

of the seat backs.

EXAMPLE

Summary of Contents for Baleno RS




































































































































































































































































































































Reviews:

No comments

Related manuals for Baleno RS

Fab Fours BLACK STEEL S2560 Installation Instructions Manual preview
BLACK STEEL S2560
Brand: Fab Fours Pages: 9
Carax HUD CRX-3001 Quick Start Manual preview
HUD CRX-3001
Brand: Carax Pages: 2
Cadillac ESCALADE FAMILY - SPECIFICATIONS 2011 Specifications preview
ESCALADE FAMILY - SPECIFICATIONS 2011
Brand: Cadillac Pages: 1
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
Toyota 4Runner 2019 Quick Reference Manual preview
4Runner 2019
Brand: Toyota Pages: 52
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
Ford 2001 Explorer Owner'S Manual preview
2001 Explorer
Brand: Ford Pages: 256
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
TATA Motors INDICA eV2 XETA CNG Supplemental Owner'S Manual preview
INDICA eV2 XETA CNG
Brand: TATA Motors Pages: 24

Brands by name

Popular brands

Load more brands