MARUTI SUZUKI Baleno RS, Owner'S Manual

Page: 217 / 323

5-38
OTHER CONTROLS AND EQUIPMENT
68PH5-74E
Selecting the band
1) Touch the “RADIO” button (3) for 1 sec-
ond or longer.
• Each time the button is touched, the
mode will change as follows:
• AM → FM1 → FM2 → AM (AS) →
FM (AS)
Seek tuning
1) Touch the “TUNE/TRACK” Up/Down
button (1) for 1 second or longer.
• The audio system stops searching for a
station at a frequency where a broadcast
station is available.
Manual tuning
1) Touch the “TUNE/TRACK” Up/Down
button (1) to select the desired station.
Storing the station
Manual store
1) Select the station and frequency.
2) Touch and hold the “CH” button (4) for
at least 1 second.
3) Hold down a desired button ([1] to [6])
of the Preset buttons (2) to which you
want to store the station for 2 seconds
or longer.
NOTE:
6 stations can be stored for AM, and 6 sta-
tions for each of FM1 and FM2, thus 18
stations can be stored in total.
Auto store
1) Touch the “AS” button (5) for 1 second
or longer.
• Start searching from a station whose fre-
quency is the lowest. When a broadcast
station that can be received with a suffi-
cient strength is discovered, it will be
assigned to the AM (AS)/FM (AS) band's
preset button (2). Once this process is
completed the tuner will return to the first
stored broadcast station.
NOTE:
• Auto store can be released by touching
the “AS” button (5) while auto store is
under way.
• When the auto store is performed, the
station previously stored in the memory
at the position is overwritten.
• 6 stations can be preset for FM, and 6
stations for AM in auto store mode.
Select from the preset channels
Manual preset channel
1) Select the radio station and frequency.
2) Touch the “CH” button (4) for 1 second
or longer.
3) Touch a desired button ([1] to [6]) of the
Preset buttons (2).
NOTE:
Touch and hold the “CH” button (4) for at
least one second to select from the preset
channel list.
Auto preset channel
1) Touch the “RADIO” button (3) for 1 sec-
ond or longer and select AM (AS) or
FM (AS).
2) Touch the “CH” button (4) for 1 second
or longer.
• The preset channel list is displayed.
3) Touch a desired button ([1] to [6]) of the
Preset buttons (2).