MARUTI SUZUKI Alto, Manual

Page: 63 / 243

2-40
BEFORE DRIVING
53MH0-74E
Information Display
Type A
53MM02003
Type B
53MM02010
(1) Clock (if equipped)
(2) Odometer/Trip meter
(3) Odometer/Trip meter/Meter illumina-
tion control knob
Manual transaxle
Type 1
53M-04-097
Type 2
53M-04-096
Auto Gear Shift
53M-04-099
Clock (1) (if equipped)
The clock is shown when the ignition
switch is in the “ON” position.
To set the clock, follow the instructions
below.
• Hold in the indicator selector and meter
illumination control knob (3) for more
than 2 seconds. Push the indicator
selector and meter illumination control
knob (3) to advance the minute display
while the minute display is flashing.
Release the indicator selector and meter
illumination control knob (3) for 5 sec-
onds to set the minute display.
• The hour display flash after the minute
display is set. Push the indicator selector
and meter illumination control knob (3) to
advance the hour display. Release the
indicator selector and meter illumination
control knob (3) for 5 seconds to set the
hour display.
Odometer/Trip meter (2)
The odometer/trip meter is shown when
the ignition switch is in the “ON” position.
The odometer records the total distance
the vehicle has been driven. The trip meter
(1) (2)
(3)
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.