MARUTI SUZUKI Alto, Manual

Page: 140 / 243

5-35
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
– When there is an adverse effect to the
sound quality of the phone or network
that you are using.
• The audio system may not function
under the following conditions.
– When the phone power is not turned
on.
– When the mobile phone is out of ser-
vice.
– When the mobile phone is not con-
nected.
– When the mobile phone battery is low
• The Bluetooth
®
’s hands-free operation is
dependent upon the mobile phone’s
compatibility.
• The Bluetooth
®
’s hands-free perfor-
mance is affected by the driving condi-
tions of mobile phone networks,
handsets and vehicles.
• The audio system’s performance may be
restricted due to the model of your
mobile phone.
• Bluetooth
®
, phone battery level and net-
work signal strength status are displayed
only when a phone is connected to the
system.
• The information depends on status
received from the phone.
• The call, contact synchronization action
is controlled from the smartphone.
It is possible to register a mobile phone
and register the phone number to the
audio system as follows:
• Up to 1,000 phone numbers can be
saved for every registered mobile
phone.
• Up to 30 phone numbers of the latest
calls can be stored. (30 calls including
missed, received and dialed call).
– When the call history exceeds 30
calls, they are deleted from the oldest
one first, and the latest call history
information is displayed in descend-
ing order.
• Up to 6 phone numbers can be saved to
the speed dial list.
• When attempts to establish the pairing
fail within 60 seconds, the connecting
operation will be canceled. Try to estab-
lish the pairing again or refer to the man-
ual of the phone in use for how to
establish the pairing with the phone.
Answer the phone
Press OFF HOOK button (2).
• When you press the ON HOOK button
(6) during an incoming call, you can
block the call. (Only for compatible
phone units)
NOTE:
• If you receive a call from a registered
phone, the caller’s name will appear on
the screen.
• If you receive a call from an unregistered
phone, only the caller’s phone number
will appear on the screen.
Hang up the phone
When the call is finished, press the ON
HOOK button (6).
Call waiting
When a phone call is interrupted by a sec-
ond call, it is possible to hold the current
call and answer the other incoming call.
To talk to incoming call:
• Press the OFF HOOK button (2). The
current call will be put on hold.
• Every time you press OFF HOOK button
(2), the phone call will be switched to the
call which was put on hold.
• When the current call is completed, the
call which was put on hold will connect.
To refuse the incoming call:
• Press the ON-HOOK button (6).
NOTE:
This function can only be used with phone
units that are compatible with call waiting.
To use the hands-free function with this
unit, it is required to register the phone
in advance.