MARUTI SUZUKI Alto Manual Download Page 148

Page: 148 / 243

5-43

OTHER CONTROLS AND EQUIPMENT

53MH0-74E

Canceling the anti-theft feature

To cancel the anti-theft function, delete the

registered PIN.

1) Press “MENU” button (2). Setup menu

will be displayed.

2) Turn “TUNE/FLD” knob (1) to select

“System Settings”, and press the knob

(1) to determine the selection.

3) Turn “TUNE/FLD” knob (1) to select

“Security”, and press the knob (1) to

determine the selection.

4) Turn “TUNE/FLD” knob (1) to select

“OFF”, and press the knob (1). “----” will

be displayed.

5) Enter a 4-digit number to be registered

as PIN by turning and pressing the

“TUNE/FLD” knob (1).

6) After entering 4-digit number, press

“TUNE/FLD” knob (1) on “Enter” indica-

tion. The anti-theft function will be can-

celed.

NOTE:

To change your PIN, first delete your cur-

rent PIN, and then set a new one.

Confirming the Personal Identification

Number (PIN)

When the main power source is discon-

nected such as when the battery is

replaced, etc, it is required to enter the PIN

to make the unit operable again.

1) Set the ignition switch to “ACC” posi-

tion.

“SECURITY” will be displayed.

2) Press “TUNE/FLD” knob (1). “----” will

be displayed.

3) Enter a 4-digit number to be registered

as PIN by turning and pressing the

“TUNE/FLD” knob (1).

4) Press and hold “TUNE/FLD” knob (1)

for a while.

When the same PIN as registered is

entered, the power of the audio system

will be turned off automatically and it

will become operable again.

NOTE:

If an incorrect PIN is entered, “ERROR”

and the total number of incorrect entry

attempts will be displayed.

If an incorrect PIN is entered 10 times or

more, “Contact Dealer” will be displayed

and the audio system will become inopera-

ble.

“Suzuki Smartplay Dock” applica-

tion

“Suzuki Smartplay Dock” is an application

that allows:

• To control the audio system

• Access smartphone features such as

calling & messaging.

• Access vehicle speed information.

69RM05008

This application can be downloaded on

smartphone through Google Play store or

Apple App Store.

EXAMPLE

Summary of Contents for Alto




















































































































































































































































Search results

Summary of Contents for Alto

Reviews:

Related manuals for Alto

Brands by name

Popular brands

MARUTI SUZUKI Alto, Manual

Search results

Summary of Contents for Alto

Reviews:

Related manuals for Alto

Brands by name

Popular brands