5-3
53MH0-74E
Air intake selector (4)
53m-07-018
This selector is used to select the following
modes.
Fresh Air (f)
When this mode is selected by moving the
lever to right, outside air is used.
Recirculated Air (g)
When this mode is selected by moving the
lever to left, outside air is shut out and
inside air is recirculated. This mode is suit-
able when driving through dusty or polluted
air such as in a tunnel, or when attempting
to quickly cool down the interior or to
reduce unwanted odor from entering the
vehicle.
“FRESH AIR” and “RECIRCULATED AIR”
are switched alternately each time the air
intake selector is pushed.
NOTE:
If you select RECIRCULATED AIR for an
extended period of time, the air in the vehi-
cle may become contaminated. Therefore,
you should occasionally select FRESH
AIR.
NOTE:
If you select RECIRCULATED AIR for an
extended period of time, the air in the vehi-
cle may become contaminated and the
windows tend to get misted. Therefore,
you should occasionally select FRESH
AIR.
53MM05013
NOTE:
The mark of “USE WITH” (6)
To clear fog on the windshield and/or the
side windows quickly, set the air flow
selector (4) to “HEAT & DEFROST” or
“DEFROST” and air intake selector (3) to
“FRESH AIR”. These positioning will clear
the fogged windshield and/or the side win-
dows faster than the “RECIRCULATED
AIR”.
Air conditioning switch (5) (if equipped)
To turn on the air conditioning system, set
the blower speed selector to a position
other than “OFF” and push in the “A/C”
switch. With this “A/C” switch operation, an
indicator light will come on when the air
conditioning system is on. To turn off the
air conditioning system, push “A/C” switch
again.
During operation of the air conditioner, you
may notice slight changes in engine
speed. These changes are normal, the
system is designed so that the compressor
turns on or off to maintain the desired tem-
perature.
Less operation of the compressor results
in better fuel economy.
System Operating Instructions
Natural ventilation
Select VENTILATION and FRESH AIR, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to off. Fresh air will flow through
the vehicle during driving.
Forced ventilation
The control settings are the same as for
natural ventilation except you set the
blower speed selector to a position other
than off.
EXAMPLE
(
6
)
(
3
)
EXAMPLE
Summary of Contents for Alto
