MARUTI SUZUKI Alto Manual Download Page 174

Page: 174 / 243

5-69

OTHER CONTROLS AND EQUIPMENT

53MH0-74E

Selecting an iPod

mode

Press the Media Source Mode button (1)

to select USB (iPod) mode.

53M-07-079

Selecting a track

• Press the Up button (8) to listen to the

next track.

• Press the Down button (7) twice to listen

to the previous track. When the Down

button (7) is pressed once, the track cur-

rently being played will start from the

beginning again.

Fast forwarding/Rewinding a track

• Hold down the Up button (8) to fast for-

ward the track.

• Hold down the Down button (7) to fast

rewind the track.

Random playback

Track random

• Press the RDM button (3).

• The random indicator “RDM” will light.

Track random is the same behavior as

album shuffle of iPod.

Folder random

• Press the RDM button (3) for 1 second

or longer.

• The random indicator “FOLD.” and

“RDM” will light. The folder random is the

same as song shuffle or iPod.

NOTE:

To cancel random playback, press the

RDM button (3) again or eject the iPod.

Repeat playback

Track repeat

• Press the RPT button (2).

• The repeat indicator “RPT” will light. The

track. Repeat is the same behavior as

one track repeat of the iPod.

NOTE:

• To cancel repeat playback, press the

RPT

button (2) again or eject the iPod.

• The unit will always trigger Repeat mode

(No indication will be displayed on unit)

in iPod automatically when iPod is con-

nected.

• when repeat mode is triggered, the unit

will play all the songs in the category

repeatedly. Repeat mode will not be

turned off unless 1-track repeat is trig-

gered.

• Turning off 1-track repeat will re-enable

Repeat mode again.

Display change

Press the DISP button (4).

Each time the button is pressed, display

will change as follow:

53M-07-080

Press the DISP (4) for 1 second or

longer.

Each time this button is pressed, title dis-

play switches as follow. Fist 8 characters

Next 8 characters.

A total of 16 characters can be dis-

played.

• If the number of character is 8 or less,

display doesn’t switch.

• Text display in iPod menu mode is

allowed to switch but it is invalid for first

category of iPod menu mode.

• If no data is stored in the particular cate-

gory, “NO DATA” will be displayed.

• If the file/artist/album title is not recorded

on the iPod, “NO TITLE” will be dis-

played.

Summary of Contents for Alto




















































































































































































































































Search results

Summary of Contents for Alto

Reviews:

Related manuals for Alto

Brands by name

Popular brands

MARUTI SUZUKI Alto, Manual

Search results

Summary of Contents for Alto

Reviews:

Related manuals for Alto

Brands by name

Popular brands