MARUTI SUZUKI Alto Manual Download Page 131

Page: 131 / 243

5-26

OTHER CONTROLS AND EQUIPMENT

53MH0-74E

Fast forwarding/rewinding a track

• Press and hold UP button (1) to fast for-

ward the track.

• Press and hold DOWN button (2) to fast

rewind the track.

• Releasing the button can stop the fast

forwarding/rewinding.

Repeat playback

1) Press and hold “MENU” button (5) to

change the display.

2) Turn “TUNE/FLD” knob (6) to select

“Repeat”.

3) Press “TUNE/FLD” knob (6) to select

one of the settings as follows.

• FOLDER

All the tracks in the folder currently

selected will be played repeatedly.

• SONG

The track currently being played will be

played repeatedly.

NOTE:

Settings may be displayed depending on

the model of iPod.

Random playback

1) Press and hold “MENU” button (5) to

change the display.

2) Turn “TUNE/FLD” knob (6) to select

“Random”.

3) Press “TUNE/FLD” knob (6) to select

one of the settings as follows.

• SONG

The tracks in the iPod will be played in

random order.

NOTE:

Settings may be displayed depending on

the model of iPod.

Display change

Press “DISP/BACK” button (4).

Each time the button is pressed, display

will change as follows:

NOTE:

• “NO TITLE” will be displayed when there

is no text information in the file currently

being played.

• If text data contains more characters

than the display area, “>” mark will

appear at the right end.

Selecting a category

Categories such as Artist, Album, Podcast,

Genre, Audiobook, Playlist, Song may be

displayed depending on the model of iPod.

1) Press and hold “TUNE/FLD” knob (6) to

change the display.

2) Turn “TUNE/FLD” knob (6) to select

one of the categories, and press the

knob (6) to determine the selection.

OFF

FOLDER

SONG

OFF

SONG

Playlist name /Track title

(Playlist mode only)

Artist name / Track title

Album name / Track title

Genre / Track title

Summary of Contents for Alto




















































































































































































































































Search results

Summary of Contents for Alto

Reviews:

Related manuals for Alto

Brands by name

Popular brands

MARUTI SUZUKI Alto, Manual

Search results

Summary of Contents for Alto

Reviews:

Related manuals for Alto

Brands by name

Popular brands