MARUTI SUZUKI Alto, Manual

Page: 109 / 243

5-4
OTHER CONTROLS AND EQUIPMENT
53MH0-74E
Normal heating (using outside air)
Select HEAT and FRESH AIR, the tem-
perature selector to the desired tempera-
ture position and the blower speed selector
to the desired blower speed position. Set-
ting the blower speed selector to a higher
blower speed position increases heating
efficiency.
Quick heating (using recirculated air)
The control settings are the same as for
normal heating except you select RECIR-
CULATED AIR. If you use this heating
method for an extended period of time, the
air in the vehicle may become contami-
nated and the windows can become misty.
Therefore, use this method only for quick
heating and change to the normal heating
method as soon as possible.
Head cooled/Feet warmed heating
Select BI-LEVEL and FRESH AIR, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to the desired blower speed posi-
tion. Unless the temperature selector is in
the fully cold position or fully hot position,
the air that comes out of the center and
side outlets will be cooler than the air that
comes out of the floor outlets.
Normal cooling
Set the air flow selector to VENTILATION,
the temperature selector to the desired
temperature position and the blower speed
selector to the desired blower speed posi-
tion, and turn on the “A/C” switch. Setting
the blower speed selector to a higher
blower speed position increases cooling
efficiency.
You can switch the air intake selector to
either FRESH AIR or RECIRCULATED
AIR as you desire. Choosing RECIRCU-
LATED AIR increases cooling efficiency.
Quick cooling (using recirculated air)
The control settings are the same as for
normal cooling except you select RECIR-
CULATED AIR and the highest blower
speed.
NOTE:
• To turn on the air conditioning system,
push in the “A/C” switch and set the
blower speed selector to a position other
than OFF. With this “A/C” switch opera-
tion, an indicator light will come on when
the air conditioning system is on. To turn
off the air conditioning system, push the
“A/C” switch again.
• During operation of the air conditioner,
you may notice slight changes in engine
speed. These changes are normal, the
system is designed so that the compres-
sor turns on or off to maintain the
desired temperature. Less operation of
the compressor results in better fuel
economy.
NOTE:
• If you select RECIRCULATED AIR for an
extended period of time, the air in the
vehicle may become contaminated.
Therefore, you should occasionally
select FRESH AIR.
• If your vehicle has been left in the sun
with the windows closed, it will cool
faster if you open the windows briefly
while you operate the air conditioner with
the air intake selector at FRESH AIR and
the blower at high speed.
Dehumidifying
Set the air flow selector to a desired air
flow selector position, the temperature
selector to the desired temperature posi-
tion and the blower speed selector to the
desired blower speed position. Also select
FRESH AIR and turn on the “A/C” switch.
NOTE:
Because the air conditioner dehumidifies
the air, turning it on will help keep the win-
dows clear, even when blowing heated air
using the DEFROST or HEAT &
DEFROST functions.