![background image](http://html1.mh-extra.com/html/martin/dvi-buffer-box/dvi-buffer-box_user-manual_1732855010.webp)
10
DVI Buffer Box user manual
P i x e l P o s i t i o n f i e l d s
The position fields allow you to fine tune the pixel coordinates of the video image. The values in the
horizontal and vertical fields are pixel offsets that are added to each panel’s video coordinates as
determined by its XY address.
Change the pixel position values as described on page 8, under “How to change numeric values”. To adjust
the pixel position of the video image:
1. Click Run to view the image on the LED curtain.
2. To move the image to the right or left, adjust the Hor: value up or down.
3. To move the image up or down, adjust the Vert: value up or down.
4. To save the settings in each panel’s non-volatile memory, click Save Parameters.
If you need to move the image more than the position fields allow, change the XY coordinates of the video
wall with the addressing controls.
A d d r e s s i n g c o n t r o l s
Show Addresses button
Clicking Show Addresses freezes the video output and displays the XY coordinates on the panels. Click
Run to clear the address display.
Enable Move check box
When Enable Move is selected, the XY coordinate address of the selected panel can be set using LCS.
This overrides the panel’s DIP-switch address setting.
To change a panel address:
1. Click the Show Addresses button.
2. Place a check in Enable Move check box.
3. In the grid display, left-click the panel to move.
4. Right-click the cell at the desired XY coordinates for the panel.
5. Click Show Addresses to update the address displayed on the panel.
6. To save the new address in memory, click Save Parameters.
7. When all panels are addressed, remove the check from the Enable Move check box to prevent
accidental changes.
Figure 10: Pixel position adjustment
Figure 11: Moving a panel in LCS
Summary of Contents for DVI Buffer Box
Page 1: ...DVI Buffer Box for LC Series Video Screen user manual...
Page 18: ......
Page 19: ......
Page 20: ......