4
DVI Buffer Box user manual
Introduction
Thank you for selecting the DVI Buffer Box for LC Series LED video display panels from Martin
®
. This
document describes how to connect the DVI Buffer Box, and how to install and use the included LC
software.
For the latest software updates, documentation, and other information about this and all Martin
®
products,
please visit the Martin
®
web site at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to [email protected] or posted to:
Technical Documentation
Service Department
Martin Professional A/S
Olof Palmes Allé 18
DK-8200 Aarhus N
Denmark
About the DVI Buffer Box
The DVI Buffer Box is an accessory device for use with LC Series LED video panels. It serves the following
functions:
• 1024 x 768 XGA monitor emulation (required by the PC or Maxedia media server)
• Genlock synchronization with other video devices
• Interface between panels and LCS, the LC series panel management PC software
About LCS
The LC software allows the user to:
• Set video curtain luminance and color levels
• Adjust individual panel levels
• View and set each panel’s XY coordinate address (overriding the panel DIP-switch)
• Tune the panel frequency for the video source
• Set vertical and horizontal video offset
• Generate test colors
• Select panel cooling mode and view panel temperature
• View panel firmware version number
• Upgrade panel firmware
Intended users
As part of a video display system, the DVI Buffer Box is intended to be installed by qualified video
technicians. The product is for professional use only. It is not for household use.
LCS is intended for use by qualified video technicians and projectionists.
Included items
The DVI Buffer Box is shipped with the following items:
• LC software CD-ROM
• RS-232 serial cable
• 2 jumper caps
• User manual (on CD-ROM)
Summary of Contents for DVI Buffer Box
Page 1: ...DVI Buffer Box for LC Series Video Screen user manual...
Page 18: ......
Page 19: ......
Page 20: ......