FIGURE 1
DC4600
CONTROL
BOX
ASSEMBLY
DC4600
MOTOR ASSEMBLY
RIGHT SIDE INSTALLATION
DC MOTOR
WIRING
HARNESS
POWER
CORD
6’(1800)
GROUNDED
WALL
OUTLET
CABLE
POST
BOWDEN
CABLE
PUSH BUTTON
EMERGENCY
RELEASE LEVER
AND MOUNTING
BRACKET
REVERSE
ANGLE
SHIELD
VERTICAL
TRACK
BOTTOM DOOR
SECTION
TOP DOOR
SECTION
COPYRIGHT © 2008 MARTIN DOOR
2
Motor Assembly See Figures 2a, 2b, 12, 47 and Step 1
DC Motor with Reduction Gear
Motor Pulley
Torsion-Shaft Pulley with Set Screws
Drive Belt
Drive Belt Tensioning Plate
Back Plate
Front Plate
Front and Back Motor Cover
Anti-torque Arm with Bolts, Spacer, Nut
Emergency Release Assembly See Figures 6a to 9b and Step 2
Emergency Release Lever with Bracket
Bowden Cable with Cable Post and D-Shackle
Screw Hook with Lock Nut
Chain Extension Package
Control Box Assembly See Figures 10a, 10b and Step 3
Control Box with Screws, Conduit Outlets
Control Box Lid With Screws and Push Button
Circuit Board with Transformer, etc.
Low Voltage DC Motor Wiring Harness
6’ (1830) Power Cord with 3-Prong Plug
Radio Control Assembly See Step 5
Radio Receiver with optional 4 cond. wire (blue, green red, white)
2-Button Transmitter (mini)
Options
2-Button Transmitter (mini)
3-Button Transmitter (keychain - micro)
4-Button Transmitter (mini)
Mounting Plate (Pocket) for Transmitter (mini)
Wireless Keyless Entry
Battery Back-up
Automatic Solenoid Lock with Side Lock Module
Door Bell Type Push Button with Wiring
Keyswitch
DOOR OPENER INCLUDES:
DC4600 - REGULAR LIFT