1248099_Rev1.0
RSEC3
Page
1/4
RSEC3
User’s Manual GB
Introduction
RADIOSENS system is designed for Fast doors and Flat-slat rolling shutters in an Industrial, Commercial or Residential environment.
RADIOSENS is an impact detection system installed at the principal edge of the door. It works detecting any obstacle before the
strength exceeds regulations limits and then inverting door movement.
RADIOSENS is a wireless system based on an RF transmitter and a receiver card plugged in the control panel which permanently
monitors the status of the transmitter programmed.
The RadioBand system is designed of domestic, commercial and industrial door applications where a safety edge is used.
The system complies with the EN ISO 13849-1 standard, category 2, PLc.
Technical data
Frequency
Multifrequency system auto-adjustable 868 MHz
Memory
RS3: 1 transmitter;
RB3: 6 transmitters (3 on closing, 3 on opening)
Standby / Operating consumption Max
90mA
Radiated power
< 1mW
Size
82 x 190 x 40 mm
Range (in open field)
50 metres
