Monitor Display
If left undisturbed for 5-7 seconds, the display will revert to ‘Monitor Mode’
The left hand vertical bar indicates that there is power (24V DC) at the unit.
The middle vertical bar indicates that there is data (DMX) at the unit.
The horizontal bars indicate the data signal level (DMX) at the unit.
Display Flip
The display-viewing angle can be flipped through 180º by pressing and holding the
‘ACTION/RECALL’
button, then pressing the
‘DOWN’
button.
Display Blank
The display can be set to auto-blackout after short time. This is selected through the mode menu.
(See later in this section)
Reset
If the
‘ACTION/RECALL’
button is depressed, and the
‘UP’
button held down for
1 second, the unit will reset to the factory default settings and the display will
show
rES
for 1 second.
This feature is particularly useful when the units are used in many different
configurations/ or shows.
Atomic Colors User Manual Operating the unit
15