10
Rail Light user manual
1. See Figure 4 and Figure 5.
Note the position of the
drilling guide groove (A) in
the channel on the lower
side of the luminaire. Drill
or grind a flat countersink
36 mm in diameter,
centered on the guide
groove and flush with the
guide groove surface at the
bottom of the channel,
maximum 250 mm (9.5 in.)
from the end of the
luminaire.
2. Drill a hole 25 mm in diameter, centered on the countersink, through the
luminaire housing.
Mount the membrane
nipple ready for cable
entry as shown in Figure
5. Cable must be passed
through the nipple for
waterproof and safe cable
entry.
Figure 5: Luminaire after drilling
Figure 6: Membrane nipple
Summary of Contents for Architectural Rail Light
Page 1: ...m a r ti na r c h i t e c t u r a l installation guide and user manual Rail Light ...
Page 25: ......
Page 26: ......
Page 27: ......