Installation
17
Connecting to analog control
An analog 1-10 V DC control link is required in order to control luminaire
intensity with a suitable dimming device. The control link consists of two
conductors, one for hot (+) and one for cold (-), that are connected to
luminaires in parallel.
See Figure 10. While the connections tray is accessible, connect the 1-10 V
DC analog control circuit to the luminaire as follows:
• Connect the 1-10 V hot (+) conductor to the connector marked
+
.
• Connect the 1-10 V cold (-) conductor to the connector marked
–
.
Reinstalling components after making connections
See Figure 7. Reinstall components in the reverse order of disassembly.
Do not reapply power until all components and covers have been reinstalled
and the installation has been inspected and tested to rule out any electrical
safety hazard.
–
Analog hot (+)
Analog cold (-)
Luminaire 1
+
Figure 11:
Schematic diagram of analog control connections
–
Luminaire 2
+
Summary of Contents for Architectural Rail Light
Page 1: ...m a r ti na r c h i t e c t u r a l installation guide and user manual Rail Light ...
Page 25: ......
Page 26: ......
Page 27: ......
