Thank you for purchasing this product of
O l y m p i a E l e c t r o n i c s . A E u r o p e a n
manufacturer.
GENERAL
These luminaires, according to Lloyd’s
Register Type Approval System are
s u i t a b l e f o r m a r i n e a n d o f f s h o r e
applications for use in environmental
categories ENV1, ENV2, ENV3 and ENV4,
where ENV1 are controlled environments,
ENV2 are enclosed spaces subject to
temperature, humidity and vibration, ENV3
are enclosed spaces subject to generated
heat from other equipment and ENV4 are
mounted on reciprocating machinery.
Each luminaire must be permanently
connected to mains power supply
.
In
normal operation the led strip lights and
the battery is charging. In case of a mains
power supply failure the luminaire will light
the led strip automatically in emergency
mode. When the mains power supply is
restored the device turns to normal
operation.
INSTALLATION
To install the luminaire follow the
installation instructions on page 3.
OPERATION
Battery Charging
The battery charging is completely
controlled
.
In this case, is
achieved the
perfect battery maintenance
,
as well as
the elongation of its duration
.
When the
battery has completely charged
,
it charges
with a maintenance current.
Battery Cut-off
The luminaire enters in this operation when
the mains power supply fails
and battery
has lost its energy
.
During this operation
the luminaire enters the idle state
and
battery consumption is negligible, in order
to be protected from deep discharge.
Manual
Test
The manual test can be conducted only if
the main power supply and the battery is
connected. By pressing the TEST/RESET
button briefly (page 3) an operation test is
initiated. During this test period all
indication LEDs are OFF.
Automatic Test
This test includes all the operations that
provide the manual test and is conducted
automatically every 15 days. In order to be
performed, the main power supply and the
battery should be connected.
Automatic Autonomous Test
The
Automatic
Autonomous
Test
is
conducted and measures the luminaire`s
back up operation. This test is conducted
automatically every six months
.
In order to
be performed, the main power supply and
Page
1
from
2
923940002_09_003
High Quality European based Manufacturers
GR-
940
/15L
/
MAR
WATERPROOF SELF TESTING EMERGENCY LUMINAIRES
220-240V AC/50-60Hz
Bayblend FR3010
,
transparent
polycarbonate
TECHNICAL CHARACTERISTICS
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
EXTERNAL DIMENSIONS
CONSTRUCTION MATERIALS
TYPICAL WEIGHT
GUARANTEE
OPERATION VOLTAGE
MAXIMUM POWER CONSUMPTION
BATTERY (Ni-Cd)
CHARGING TIME
INDICATIONS
BATTERY PROTECTION
MINIMUM AUTONOMOUS DURATION
DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH
ILLUMINATION (MAINS / EMERGENCY)
ILLUMINATION SOURCE
From overcharge and full discharge
IP 65
3.6V/3Ah
o
5 to 40 C
Up to 95%
3 years
(1
year for the battery
)
105lm / 105lm
480min
15 white LED’s
4W/7VA
9
45gr.
36
3
x 145 x 73 mm
Charge, lamp fault, battery fault indication LED
24h
EN 60598-1, EN 60598-2-22
, ΕΝ 55015, ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3
, IEC 60092-306, IEC 60533
