TRITON ™ Installation Instructions
SAFETY INSTRUCTIONS
Read and understand this entire manual before attempting to assemble, operate, or install the LED Luminaire. If you
have any questions regarding the product, please call TGS Customer Service at (818) 206-4404.
1. All electrical work must conform to the National Electric Code (NEC) and all applicable local codes and ordinances.
2. Only qualified personnel shall install and maintain the luminaires. TGS recommends that a licensed electrician install and maintain
the luminaire. Verify the safety of existing power distribution system before beginning installation. FAILURE TO FOLLOW OPERATING
INSTRUCTIONS MAY LEAD TO DEATH, SEVERE INJURY, OR PROPERTY DAMAGE.
Turn off power before performing any electrical or control work. FAILURE TO FOLLOW THIS WARNING MAY LEAD TO DEATH,
SEVERE INJURY, OR PROPERTY DAMAGE.
DO NOT make or alter any open holes in the luminaire. Do not modify the luminaire.
WARNING
Follow all applicable safety procedures and use Personal Protective Equipment such as hardhats, safety glasses, reflective vests,
electrical safety gloves, fall protection equipment and safety toe boots during the installation, operation, and maintenance of the
luminaire. FAILURE TO FOLLOW THIS WARNING MAY LEAD TO DEATH, SEVERE INJURY, OR PROPERTY DAMAGE.
WARNING
Risk of eye injury! Eye protection is required at all times during the installation, operation, and maintenance of the luminaire. The
high intensity light produced by the luminaire can cause severe damage to the eye if viewed directly at close range. Avoid being
in front of a luminaire that is on or wear suitable light blocking protective eyewear such as welding goggles.
Store luminaires in a clean, dry place, protected from dirt, water, and sunlight. See table for required storage and operating conditions:
WARNING
Storage Temperature
40°F to 167°F
Operating Temperature
-20°~131°F
Humidity
5% to 95% non-condensing
TRITON ™ Installation Instructions
TRITON ™ Installation Instructions
