SAFETY PRECAUTIONS
The installation of the product must be performed by qualified personnel in accordance with
local laws and regulations on safety.
In agreement with the European Directive 2004/108/EC (EMC), the product must be installed
using equipment, cables and accessories that allow it to meet the requirements of the Directive
for fixed installations.
The product must be connected to the mains supply by following the instructions in this
manual.
Keep physically separated extra low voltage wires, including the battery, the wire low voltage
(230Vac).
IMPORTANT
Only trained and authorized personnel can service the product, with the aim of making the
connections described in this manual. In case of failure do not attempt to repair the product or
the warranty will no longer be valid.
The opening of this unit may provide dangerous parts under tension. Remember to disconnect
the power before you get your hands on the power supply section.
It is recommended to periodically verify the proper functioning of the alarm system, however,
a reliable electronic alarm system will not prevent theft, tampering, fire, etc., but merely
reduce the risk that such situations occur.
ACCORDANCE WITH THE EUROPEAN DIRECTIVES
The product meets the essential requirements of European Directive 2004/108/EC
(Electromagnetic Compatibility Directive - EMC) and is therefore consistent with the
harmonized standards EN 50130-4, EN 61000-6-3.
To connect to the 230V, use cables with greater than 0.5 mm and with an extra
jacket to ensure greater protection.
Installation and Programming Manual V1.2
4
