4. Turn
ON
the microswitch
6
to enable fine calibration of
loop2
;
•
Adjust the trimmer
R17
until
you see on the display
The segments “g” e “p” indicate the optimal adjustment of the fiber loop.
When adjusting the trimmer, the segment "a" and the segment "d" indicate whether it is
increasing or decreasing the value of reading. In detail:
The segment "a" blinks during adjustment if the value of reading increases.
The segment "d" blinks during adjustment if the value of reading decreases.
Too high or too low value in reading are identified with the segments "f" and "e" turned
on
5. Turn
OFF
the microswitch
6
.
The adjustment of the fiber loop is completed.
After making adjustments, be sure that the
Installation and Programming Manual V1.2
21
