IOM -
RXTS Series
24
WARNING
You must extend the Anti-Tip
Brackets into the Window Track
Opening. Failure to follow this
warning may cause serious
injury.
The images below show how the Anti-Tip Bracket is to be installed in the window track.
Note the Side Arm Foam was removed for illustration purposes only.
Top view
Extend into Window Track
The factory installed 1/2“ screw
must be re-used to secure the
Anti-Tip Bracket. Failing to use
this screw could damage the
air conditioner.
Top of Unit
D. The Anti-Tip Brackets must be
extended into the window track
opening (the vertical track your
window slides up and down in)
until they stop.
Secure the brackets in place
by using the provided 1/2“
Phillips head screw.
Fig. 21
Fig. 22
Top view
Anti-Tip Bracket
Installed in Window
Track Opening
Fig. 23
Page 24
Installation
Instructions