IOM -
RXTS Series
16
WINDOW REQUIREMENTS
Your air conditioner is designed to install in
standard double hung windows with opening
widths of 22-36” (559mm-914mm) and a
window height of 13.5” (343mm).
DANGER
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power cord
of the air conditioner.
Aluminum house wiring may present
special problems- consult a qualified
electrician.
When handling the unit, be careful to
avoid cuts from sharp metal edges and
aluminum fins on front and rear coils.
TOOLS YOU WILL NEED
Phillips
Screwdriver
Level
Flat Head
Screwdriver
Pencil
Ruler or tape
measure
Scissors or knife
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT-Save these instructions for
local inspector’s use.
IMPORTANT-Observe all governing codes
and ordianaces.
Note to Installer- Be sure to leave these
instructions with the Consumer.
Note to Consumer- Keep these instructions
for future reference.
Skill level- Installation of this appliance
requires basic mechanical skills.
Completion time- Approximately 1 hour.
We recommend that two people install this
product.
Proper installation is the responsibility of
the installer.
Product failure due to improver installation
is not covered under the Limited Warranty.
You MUST use all supplied parts and use
proper installation procedures as described
in these instructions when installing this air
conditioner.
Installation is recommended to be comple-
ted by 2 people.
Wooden Windows
INNER
WINDOW SILL
INTERIOR
WALL
13.75" min
(349 mm)
22" to 36"
(558 mm to 914mm)
SEAL FOAM
Vinyl-Clad Windows
INNER
WINDOW SILL
13.75" min
(349 mm)
22" to 36"
(558 mm to 914mm)
SEAL FOAM
Drill and 1/8”
drill bit
Proper PPE
WINDOW-MOUNTED INSTRUCTIONS
Installation
Instructions
Page 16