IOM -
RXTS Series
32
Air Conditioner
Features
DISPLAYS
NOTICE:
If the unit turns off unexpectedly due to
the power being cut, it will automatically
restart with the previous function setting
when the power resumes.
DISPLAYS:
Shows the set temperature in "
℃
" or "
℉
" and the Auto-timer settings. While
on Fan only mode, it shows the room temperature. If the room temperature is too
high or low, it will display " HI" or " LO".The control is capable of displaying
temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the
other, press and hold the Up and Down buttons at the same time for 3 seconds.
Display
Error codes:
The unit may stop operation or continue to run safely. If the error codes appear, wait for about 10 minutes.
The problem may resolve itself. If not, disconnect the power, then connect it again. Turn the unit on.
If the problem persists, disconnect the power and contact your nearest customer service center.
Error code appears andbegins with the letters as the following in the window display of indoor unit:
EH(xx), EL(xx), EC(xx) , PH(xx), PL(xx), PC(xx).
ADDITIONAL THINGS YOU SHOULD
KNOW
Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar with.
• The Cool circuit has an automatic 3 minutes time
delayed start if the unit is turned off and on
quickly. This prevents overheating of the
compressor and possible circuit breaker tripping.
The fan will continue to run during this time.
NOTICE:
If your problem persists after performing the checks and diagnostics above,
turn off your unit immediately and contact an authorized service center.
SLEEP
button
Press Sleep button to initiate the sleep mode. In this mode the selected temperature will increase
(in cooling mode) by 2
℉
/1 (or 2)
℃
30 minutes after the mode is selected. The temperature will then
increase (in cooling mode) by another 2
℉
/1 (or 2)
℃
after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it returns to the originally selected temperature.
This ends the Sleep mode and the unit will continue to operate as originally programmed.
The Sleep mode program can be cancelled at any time during operation by pressing the Sleep
button again.
8
SWING
button
Used to initiate the Auto swing feature. When the operation is ON, pressing the SWING button
can stop the louver at the desired angle.
Press SWING button
for 3 seconds to initiate the filter feature. This feature is a reminder to clean the
Air Filter for more efficient operation. The LED(the light above the button) will illuminate after 250
hours of operation.
9
Page 32
10
LED
button
• Press LED button
to turn the LED display on and off, which create a comfortable environment.