37
36
-Collateral standard: Electromagnetic compatibility - Requirements
and tests
EN60601-1:2006, IEC60601-1:2005 Medical electrical equipment -
Part 1: General requirements for basic safety and essential Perfor-
mance
Chapter 26 : WARRANTY
All Premier Combo Plus Digital TENS/EMS models carry a warranty
of one year from the date of delivery. The warranty applies to the
stimulator only and covers both parts and labour relating thereto.
The warranty does not apply to damage resulting from failure to
follow the operating instructions, accidents, abuse, alteration or dis-
assembly by unauthorized personnel.
Chapter 27: ELECTROMAGNETIC COMPATIBILITY
INFORMATION
The device complies with current specifications with regard to elec
-
tromagnetic compatibility and is suitable for use in all premises,
including those designated for private residential purposes. The
radio frequency emissions of the device are extremely low and in all
probability do not cause any interference with other devices in the
proximity.It is recommended that you do not place the device on top
of or close to other electronic devices. Should you notice any inter-
ference with other electrical devices, move the device or connect it
to a different socket. Radio equipment may affect the operation of
this device.
Guidance and manufacturer’s declaration - electromagnetic emissions
The EM-6300A is intended for use in the electromagnetic environment
specified below. The customer or the user of the EM-6300A should
assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment -
guidance
RF emissions
Group 1
The EM-6300A must emit electromag-
netic energy in order to perform its
CISPR 11
intended function. Nearby electronic
equipment may be affected.
RF emissions
Class B
The EM-6300A is suitable for use in all
CISPR 11
establishments other than domestic
Harmonic emissions Class C
those directly connected to the public
IEC 61000-3-2
low-voltage power supply network that
Voltage fluctuations Complies
supplies buildings used for domestic
/ flicker emissions
purposes.
IEC 61000-3-3
