Mark OptiTherm Plus 06 29 189, Technical Manual, Page: 14 / 140

14
5.6 Settings menu: Change date/time
To adjust the date/time you follow the images below:
OK OK
ESC ESC ESC
select select modify
Settings
Overtime setting
Select Temperature sensor
Calibrate
Date/Time
ECO fan function
2x
Date/Time
Time
Date 01 - 03 2011 -
: 08 00
Date/Time
Date
Time
- - 2011 01 03
08:00
OK
to next digit
back to main screen
•
With the  and  button, select the menu-item Date/time in the menu settings and then
push the OK button.
•
Now select the date by pushing the OK button.
•
Change the date with the  and  button and confirm each input with the
OK
button
after which the display automatically goes to the next entry. After you have changed the
year, the display will automatically go back to the Date.
•
Now with the

and

button, select Time
•
Now with the

and

button, select Time and then push the
OK
button. With the

and

button change the hours and minutes and confirm each entry with the
OK
button, after
which the display automatically goes to the next entry. After you confirm the last entry you
automatically go back to the Time.
•
When you have finished the changes and these are confirmed with the OK button, you push
the ESC button to go back to the settings menu.
•
Now select another item to change or to go back to the user menu by pushing the ESC
button. Push the ESC button again to go back to the main display.
5.7 Settings menu: Change overtime timer settings
To change the overtime timer settings you follow the image below:
OK OK
ESC ESC ESC
select select modify
Settings
2x
OK
to next digit
Overtime setting
Switch to
Max time setting
Day
Overtime setting
Switch to
Max time setting
Day
01 : 00 01 : 00
back to main screen
Overtime setting
Select Temperature sensor
Calibrate
Date/Time
ECO fan function
•
With the  and  button, select the menu-item Overtime timer in the menu settings and
then push the OK button.
•
Now the maximum time duration of the overtime timer and to which mode of operation
the Op must be switched, can be changed using the overtime timer.
•
s elect the maximum setting time and then push the OK button.
•
With the  and  button, change the maximum time (minimum increasing or decreasing is
15 minutes). And then push the OK button.