Mark OptiTherm Plus 06 29 189, Technical Manual, Page: 12 / 140

12
5.3 User menu: change/set the clock program
To adjust the existing clock program or to enter new times:
•
You select the menu item clock program and then you push the
OK
button.
•
Now change the existing clock program or input a new clock program following the images
below:
Clock Program
Date
Interval
Switch to
Program
12345
08:00 >> 17:00
Day
1
Clock Program
Date
Interval
Switch to
Program
12345
08:00 >> 17:00
Day
1
OK OK
ESC ESC ESC
select select modify
User Menu
Clock Program
Special day
Settings
Temperature
back to main screen
•
Now with the  and  button, you select the menu-item program and then push the OK
button
•
With the  and  button, select a new or existing program block (1 to 20) and then push
the
OK
button.
•
Now with the

and

button, you select Day and then push the
OK
button
•
Now with the

and

button, you change to the desired days and then push the
OK
button again.
(12345, 1234567, 1, 2, 3, 4, 5, 6, 7, 67, 2345 or off).
1=Monday, 2=Tuesday, 3=Wednesday, ……, 6=Saturday, 7=Sunday
•
Now with the  and  button, you select the switch time program and then push the OK
button
•
now with the  and  button you change the hours and minutes from the start and end
times, in that order. Confirm each entry with the OK button after which the display goes
automatically to the following entry. After you confirm the last entry you automatically go
back to the menu-item clock program
•
Now with the  and  button, you select switch to and then push the OK button.
•
Now with the  and  button you change the desired mode of operation ( DAY,
NIGHT, ECO ) and then push the OK button.
Repeat the above to input a new clock program or another change.
When you are finished with changing the clock program:
•
You push the
ESC
button to go back to the user menu again.
5.4 User menu: change/set exception day
Exception days can be used to allow the Op to switch to another mode of operation
on a certain date. After the exception day has passed then it automatically disappears from the
program and it is again available for the entry of a new one. You have 20 program blocks available
for input.
To program or to change an exception day:
•
With the  and  button, you select the menu-item exception day and then push the OK
button