Mark OptiTherm Plus 06 29 189, Technical Manual

Page: 11 / 140

EN
11
5.0 Change settings
5.1 Call user menu
To activate the users menu:
•
You push the OK button.
•
After which you enter the correct Pin code according to the image below
(standard factory setting is 1000).
select modify
User Menu
Clock Program
Special day
Settings
Temperature
OK
ESC ESC
2x
OK
factory default
menu code
1 0 0 0
User Menu
18.0 °C
01-03-2011
08:10
0 . 2 1
Code 0 0 0 0
OK
na 4x
to next digit
•
with the  and  button you change the flashing figure.
•
you confirm this with the
OK button and you jump to the next figure. After you push on
the
OK button at the 4th figure and you enter the correct pin code, you enter the user
menu and you can change the temperature setting, the switch times, the exception days and
all the other settings.
When an incorrect pin code is entered the screen image pin code input remains visible and the
code jumps back to 0000.
Note!
When no button is pressed for the duration of 1 minute the Op display will
automatically leave the menu and go back to the main display.
5.2 User menu: change the temperature setting
To change the temperature setting you follow the images below:
User Menu
Clock Program
Special day
Settings
Temperature
OK OK
ESC ESC ESC
back to main screen
select modify
Temperature
Eco
Night
Frost
Day
5.0 °C
8,0 °C
15,0 °C
18,0 °C
Temperature
Eco
Night
Frost
Day
5.0 °C
8,0 °C
15,0 °C
18,0 °C
select
•
In the user menu select the menu-item temperature and then push the
OK
push-button.
•
With the  and  button, select the mode of operation which you wish to change and
confirm this with the OK button.
•
The display jumps to the temperature setting of the chosen mode of operation. With
the
 and  button, change the temperature setting and confirm this with the OK button.
Follow the steps above to change the other temperature settings.
When you are finished with changing the temperature settings:
•
After the last change you press the OK button to confirm this.
•
Then you push the ESC button to go back to the user menu again.