38
TRAMPOLINE TESTING
After the trampoline assembly, it is necessary to perform the following safety
checks:
SAFETY CHECKS ON THE TRAMPOLINE:
•
Check if all the screws are tightened by using the screw driver.
•
Look under the trampoline and check if all the springs are hooked onto the fra-
me and triangles.
•
Turn the trampoline a little and check the frame strength.
•
By using both hands, lean towards one of the trampoline parts and then move
back to check if the surface is flat.
•
Check the springs’ cover and if it covers the springs and trampoline frame.
•
Make sure that the cover ropes are fixed tightly.
PROTECTIVE NET CHECK:
•
Hold the pillar and shake it so you can simultaneously monitor if all the pillars
are stable.
• Check the protective net and pillars to make sure that no stitches or materials
are damaged.
•
Check the net zip and if the entry hooks work properly.
•
Check if all the safety hooks are hooked into the triangles under the trampoline.
If you check everything and the initial test of your trampoline is successful (above),
you can try the trampoline with continuous jumping in the middle for approximate-
ly 5 minutes. If the trampoline looks firm, it has passed the test. Congratulations,
trampoline assembly is complete! Remember to observe all the safety rules. Enjoy
and play safely.
COMPLETED – YOUR TRAMPOLINE IS READY FOR USE
Návod trampolina.indd 38
3. 8. 2017 16:34:50
