Marani MIR-A Series, User Manual

Page: 22 / 60

ENTER
PUSH
NAV
Turning
Turning
PM1
5.3.14 PEQ1-8
Specific turning of each stage of parameter
equaliza on, a er enter, you can rotate PM1 to
select filter type, you can rotate high and low
Chevron/Bell/high and low pass/all pass/notch, etc.,
rotate RAV naviga on key to enter specific
parameter adjustment, PM1= gain, PM2= Q value,
frequency and so on
.
● Press the Edit key of Output 2
● Rotate the NAV to select PEQ1
● Press Enter
● Rotate PM2 to the right to select AllPs2 filter
● Press ESC
● Con nue to rotate the NAV selec on frequency
adjustment to the right
● Rotate PM1 to adjust the frequency to 5600Hz,
use PM2 to fine tune to 5606Hz·
● Press ESC to return
● Rotate NAV right to adjusts the Q value
● Complete return
Types include: BELL, HiShv1, HiShv2, HiShvQ,
LoShv1, LoShv2, LoShvQ, LP1st, LP 2nd, LP Q, HP 1st,
HP 2nd, HP Q, Notch, AllPs1, AllPs2
.
When the combina on of I I R and F I R filter is
selected, the highest slope of IIR filter is -24dB/Oct,
and only 4 band PEQ are available
.
When the MIR or FIR filter type is selected, the
high/low pass filter cannot be adjusted on the panel,
only by so ware
.
5.3.13 Equalizer on state
PEQ overall on/off
.
20
MIR-A
MIR-A Speaker Management
Software specification
Turning
PM2
NAV
Turning
Turning
PM1
Turning
PM2
NAV
Turning
Turning
PM2