Marani MIR-A Series, User Manual

Page: 9 / 60

7
MIR-A
MIR-A Speaker Management
Software specification
ENTER
PUSH
Select signal type
Adjust signal level
PM1
PM2
Turning
PM2
Turning
PM1
Select input channel
Turn on/off linkage
PM1
PM2
Turning
PM1
Turning
PM2
ENTER
PUSH
Select input channel
Turn on/off linkage
PM1
PM2
Turning
PM1
Turning
PM2
ENTER
PUSH
Turning
PM2
5.FRONT PANEL OPERATION
5.1 System Se ngs
U lity general menu contains 3 sub-menu System
se ngs,Under U lity Menu, turn the NAV naviga on
key to select System U li es
5.1.1 Input Source Selec on
Press Enter to enter the secondary sub-menu, where
you can select Analog input or built-in Signal
generator.
5.1.2 Signal Generator Se ngs
Use the PM1 knob to select pink noise or white
noise, and use the PM2 knob to adjust the signal
level from -30dBu to +10dBu, with a step of 1dB
.
5.1.3 Link Input
For the linked input channel, modify the se ngs of
any one of the linked channels, and the other linked
channels will synchronously modify the same value
.
Turn the le and right knobs PM1 to select the ABCD
channel, turn P M2 to the right to turn on the
selected channel linkage, turn PM2 to the le to turn
off the selected channel linkage
.
5.1.4 Linkage output
For the input channel a er linkage, modify the
se ngs of any linkage channel, and the other linkage
channels will simultaneously modify the same value
.