Marani MIR-A Series, User Manual

Page: 14 / 60

Turning
PM1
Turning
PM1
Turning
PM1
Turning
PM1
When adjus ng the maximum allowable gain, the
adjustment step of the knob PM1 is 1dB, and the
adjustment step of PM2 is 0.1dB
.
There are three levels of start-up me adjustable,
namely fast, medium and slow
.
5.2.4 Gain
Controllable gain range from -18 to + 12dB, 0.1dB
step
.
5.2.2 Noise gate
The noise gate can appropriately suppress the
o b v i o u s b a c k g r o u n d n o i s e c a u s e d b y t h e
accumula on of front-end equipment or improper
system se ngs. On the current page, click Enter to
edit the overall state of the noise gate, and rotate
PM1/PM2 to open or close the noise gate
.
The threshold can be adjusted from -80 dBu to -45
dBu through Pm1
.
The startup me can be adjusted from 1ms to
1000ms by rota ng Pm1
.
The release me can be adjusted from 1ms to
1000ms by rota ng Pm1 .
5.2.3 Dynamic loudness booster
In the input channel, the working principle is based
on the equal loudness curve of the human ear to
compensate and enhance the ultra-low frequency
and ultra-high frequency
.
When the signal strength is low, the boost ra o is
rela vely large; when the signal strength is high, the
boost ra o is rela vely small or even zero
.
The maximum allowable boost gain value can be set
separately for UHF and UHF, and the se ng of
star ng speed is also provided .
12
MIR-A
MIR-A Speaker Management
Software specification
Turning
PM1
Turning
PM1
Turning
PM1
Turning
PM1
Turning
PM1
Turning
PM1
Turning
PM1