Marani MIR-A Series, User Manual

Page: 50 / 60

Connect the sound reinforcement system and the measurement system according to the instruc ons on the
figure. Note: No NEED "reference channel" of other measurement so ware always required Click start.
Adjust the output knob and input knob of the ASIO sound card to make the sound pressure level sufficient
during the whole measurement process, and the measured signal level indicated by the level meter does not
exceed -6dBFs at the highest and -30dBFs at the lowest to ensure sufficient signal-to-noise ra o.
A er confirming, you can close the test page and click measure .
48
MIR-A
MIR-A Speaker Management
Software specification