Maquet Datascope CS300, Operator'S Manual, Page: 23 / 24

21 | | Abbreviated Operator’s Guide | CS300
™
|
To attach the monitor to the pump console:
Detach the monitor from the cart handle by pressing the button on the rear of the
monitor (fig. 4). Attach the monitor to the top of the pump console. Make sure the
monitor is securely attached before moving the system. Extend the console handle until
it locks into position, tilt the System, and pull to transport (fig. 5).
Fig. 4 Fig. 5
Release button
PULL
VAULT COPY