13
|
|
Abbreviated Operator’s Guide
|
CS300
™
|
OPERATOR INTERVENTION
for Unable to Update Timing
n
Check integrity of all cable connections. If transducer is in use, verify transducer was
not left vented.
n
If pulse height is unusually low or over damped and transducer is in use, flush the
fluid lumen per standard hospital procedure.
n
If not properly triggering or signal problems persist, switch OPERATION MODE to
SEMI AUTO. Verify trigger source and timing and resume pumping by pressing the
START key.
INfORMATIONAL MESSAGES
Informational Messages provide system information to the Operator. Informational
Messages display textual messages and, in some cases, are accompanied by an
infrequently repeating audio reminder tone.
n
Status/Prompts apply to all Operation modes unless otherwise indicated:
A
= Auto /
SA
= Semi Auto /
M
= Manual Operation mode.
MESSAGE
PROBABLE CAUSE
IAB not filled
[SA / M]
System is in Manual Fill and user pressed the
START key when no fill had been performed.
Verify Proper Timing
[SA / M]
Operator has changed the trigger source.
Manual Fill IAB
[SA / M]
Notifies the operator when to manually fill the
IAB catheter with shuttle gas. Displayed in
the MANUAL FILL mode when the FILL key is
activated, venting the safety disk.
Leak Testing Safety Disk
Indicates safety disk leak test is in progress.
Autofilling
Indicates that the system is in the process of
Automatically purging and refilling the IAB with
Helium.
Automatic Operation mode is disabled
[SA / M]
System is set to Manual Fill mode and the
operator tries to select AUTO Operation
mode.
Gas Loss and Catheter Alarms Disabled
All leak and catheter alarms are disabled
when the manual fill mode is selected.
Slow Gas Loss Alarm is Off
Slow gas loss alarm has been disabled by
the user.
NOTE:
Rapid gas loss function is still active.
Function Not Available
Displayed when the operator presses an
unavailable key.
Function unavailable in AUTO Operation
mode
[A]
Displayed when the operator presses an
unavailable key while in the AUTO Operation
mode.
Battery in Use
Indicates system is operating from an internal
battery.
VAULT COPY