6. Parameter Input
• DOK-CONTRL-DDC+MDD+DLC-ANW1-EN-E1,44 • 01.97
40
6.2.
Using the CTA to Input Parameters
Fig 6.1: The CTA - a programming and diagnostics unit
Keyboard Functions
Fig 6.2: Keyboard functions
CR
7
4
5
6
1
2
3
+
8
9
0
-
3
CL
Liquid crystal
display
(LCD)
4 lines with 16 places each
Front panel
Keypad
FACTA
9
+
0
-
CL
CR
Input of program or parameter data
1. Qualifying sign input
2. Scrolling up or down in program or parameter block
Key for clearing errors.
With this key, the cursor is placed on defined input
positions.
(not effectual in parameter mode)
Cursor right, cursor left.
1. From the basic position of the cursor, these keys
are used to switch from one display to the other.
2. These keys are used to call up commands in
programm input mode. The cursor must be placed at
position behind the command.
3. In parameter mode, these keys can be used to
switch between parameter blocks A100...C000
Input key
To assume parameters, press input key.
Free key -
scrolling between parameter blocks A100,
B000 and C000.
MTCTA
to
