Manitowoc QuietQube Indigo Series Technician'S Handbook Download Page 76

Page: 76 / 248

Part Number STH026 2/12

PASSWORD ON

A password can be added to prevent unauthorized

changes to ice machine settings.

1. From the Set-Up menu, use the Down arrow to

highlight Password On.

2. Enter the password and press the Checkmark.
3. Press the Left arrow to return to previous screens

and to the Set-Up menu.

EDIT PASSWORD

The password can be changed on this screen

1. From the Set-Up menu, use the Down arrow to

highlight Edit Password.

2. Press the Checkmark and confirm current

password.

3. Enter new password and press the Checkmark.
4. Press the Left arrow to return to previous screens

and to the Set-Up menu.

CLEAN MINDER

Clean Minder is a feature that displays a cleaning

reminder at a set time interval.

1. From the Set-Up menu, use the Down arrow to

highlight Clean Minder.

2. Press the Checkmark. On this screen, you can

choose to turn the reminder ON or OFF by

highlighting your choice and pressing the

Checkmark. Selecting one will deselect the other.

3. You can also choose the time interval from this

screen by highlighting Set Interval and pressing

the Checkmark.

4. Press the Left arrow to return to previous screens

and to the Set-Up menu.

Indigo_Model_Tech.book Page 76 Monday, February 20, 2012 1:17 PM

Summary of Contents for QuietQube Indigo Series

























































































































































































































































Search results

Summary of Contents for QuietQube Indigo Series

Reviews:

Related manuals for QuietQube Indigo Series

Brands by name

Popular brands

Manitowoc QuietQube Indigo Series, Technician'S Handbook

Search results

Summary of Contents for QuietQube Indigo Series

Reviews:

Related manuals for QuietQube Indigo Series

Brands by name

Popular brands