26
Part Number 020007115 06/27/2019
Operation
Section 3
Refrigerated Cabinet Operation
See “Controls/Programming/Settings” on page 44 for details
on how to control settings for the refrigerated cabinet.
IN-LINE STRAINER
The in-line coffee strainer is located inside celling of the
refrigeration cabinet. It filters out any coffee grounds and/or
other foreign objects, preventing line clogs and dispense issues.
How to Inspect the In-line Strainer
1. Locate the in-line coffee strainer on the celling of the
refrigeration cabinet.
Bowl
2. Look at the clear bowl to see if there are grounds or
other debris in the strainer and clean if needed.
HOW TO REMOVE STRAINER
A. First depressurize the system and disconnect the keg.
See “Keg Change” on page 24
B. Put down a towel or small cloth to catch any coffee
that may still be in the line or bowl during removal.
C. Grasp the bowl and rotate counterclockwise to
loosen and remove the bowl.
Strainer
Gasket
Bowl
NOTE: The strainer is a metal mesh ring that will be located
inside the bowl. Also be careful not to damage the rubber
gasket that is seated in the bowl.
D. Visually inspect the clear strainer bowl for debris
and coffee grinds.
E. Rinse under tap water, clean and sanitize before
putting back into place.
F. Reassemble the bowl with mesh and gasket back in place.
G. Rotate bowl clockwise and hand tighten.
H. Reconnect the keg and check for leaks.
Summary of Contents for Multiplex N2Fusion
