Manitowoc Indigo Series Technician'S Handbook Download Page 77

Page: 77 / 270

Part Number STH025 02/12

ICE PROGRAM

To save energy and water, the ice machine can be

programmed to only power up during time periods that

the ice will be used or when the bin level is being

depleted by heavy use.

1. In the Energy Saver menu, ensure that Ice

Program is highlighted.

2. Press the Checkmark. On this screen, you can

choose to turn on the time program or the bin

level program by highlighting your choice and

pressing the Checkmark. Selecting one will

deselect the other. If one of them is selected and

you wish to turn both off, highlight the choice and

press Checkmark again.

3. If neither of the programs is selected, highlighting

Settings and pressing the Checkmark will simply

return to the top of this screen. If one of the

programs is selected, highlight Settings and press

the Checkmark to choose the times or bin levels.

NOTE: For details on how to use the cursor for

the time program, refer to “Display Panel

Navigation” in this section.

4. Select Exit to return to previous screens and

again to the Energy Saver menu.

Important

Setting an ice program will take the ice machine

out of the On/Off Mode and the Power button will

be disabled.

Summary of Contents for Indigo Series















































































































































































































































































Search results

Summary of Contents for Indigo Series

Reviews:

Related manuals for Indigo Series

Brands by name

Popular brands

Manitowoc Indigo Series, Technician'S Handbook

Search results

Summary of Contents for Indigo Series

Reviews:

Related manuals for Indigo Series

Brands by name

Popular brands