Manitowoc Indigo Series Technician'S Handbook Download Page 62

Page: 62 / 270

Part Number STH025 02/12

Alerts and Messages

When messages and alerts exist, they will be

highlighted and can be selected with the Left arrow.

Alerts displayed will have priority over messages.

For example, if alerts are appearing in the fourth line of

the display:

1. Press the Left arrow. A list of alerts will appear in

the display.

2. Choose the alert you wish to address by moving

the highlight brackets with the Down arrow.

3. Press Checkmark again. A screen appears with

the date, time and total number of times an alert

has occurred. Pressing the Down arrow will list

some possible causes for the alert. At the bottom

of the screen you will be able to clear the alert by

pressing the Checkmark.

4. Return to the Home screen by selecting Exit and

pressing the Checkmark.

O f f
O n / O f f M o d e

[ ]

Summary of Contents for Indigo Series















































































































































































































































































Search results

Summary of Contents for Indigo Series

Reviews:

Related manuals for Indigo Series

Brands by name

Popular brands

Manitowoc Indigo Series, Technician'S Handbook

Search results

Summary of Contents for Indigo Series

Reviews:

Related manuals for Indigo Series

Brands by name

Popular brands