Manitowoc Indigo Series Technician'S Handbook Download Page 69

Page: 69 / 270

Part Number STH025 02/12

4. Press the Checkmark. The date will appear on the

first line of the display (Mo/Day/Yr) and the time

will appear on the second line (24 Hour). The

month will have a blinking cursor.

5. Using the Up or Down arrow, adjust the month, if

necessary.

6. When the correct month appears, use the Right

arrow to move the blinking cursor to day.

7. Using the Up or Down arrow, adjust the day, if

necessary.

8. When the correct day appears, use the Right

arrow to move the blinking cursor to year.

9. Using the Up or Down arrow, adjust the year, if

necessary.

10. When the correct year appears, press the

Checkmark. Use the Right arrow to move the

blinking cursor to hour.

11. Using the Up or Down arrow, adjust the hour, if

necessary.

12. When the correct hour appears, use the Right

arrow to move the blinking cursor to minutes.

13. Using the Up or Down arrow, adjust the minutes, if

necessary.

14. When the correct minutes appear, press the

Checkmark twice.

Summary of Contents for Indigo Series















































































































































































































































































Search results

Summary of Contents for Indigo Series

Reviews:

Related manuals for Indigo Series

Brands by name

Popular brands

Manitowoc Indigo Series, Technician'S Handbook

Search results

Summary of Contents for Indigo Series

Reviews:

Related manuals for Indigo Series

Brands by name

Popular brands