OPERATING CONTROLS AND PROCEDURES
TMS800E13 OPERATOR MANUAL
3-28
Published 02-06-2014, Control # 495-00
This indicator will become visible whenever there is an active
engine fault. The operator should return to the fault screen to
view the active fault(s).
System Fault Active Indicator (13)
This indicator will become visible whenever there is an active
system fault. The operator should return to the fault screen to
view the active fault(s).
Crane Function Hours Screen (Figure 3-13)
The time the operator spends performing crane functions
(swing, tele, lift, and hoist) is logged by the control system.
This time, broken down into hours, minutes, and seconds is
displayed on this screen.
Swing Function Time (1) (Figure 3-13)
Telescope Function Time (2)
Lift Function Time (3)
Main Hoist Function Time (4)
Aux Hoist Function Time (5)
NOTE: only visible if the Aux Hoist is enabled in the crane
control EEPROMs.
Engine Fault Active Indicator (6)
This indicator will become visible whenever there is an active
engine fault. The operator should return to the fault screen to
view the active fault(s).
System Fault Active Indicator (7)
This indicator will become visible whenever there is an active
system fault. The operator should return to the fault screen to
view the active fault(s).
FIGURE 3-13
Item
Description
1
Swing Function Time
2
Telescope Function Time
3
Lift Function Time
4
Main Hoist Function Time
5
Aux Hoist Function Time
6
Engine Fault Active Indicator
7
System Fault Active Indicator
Reference Only
