OPERATING CONTROLS AND PROCEDURES
TMS800E13 OPERATOR MANUAL
3-10
Published 02-06-2014, Control # 495-00
Dimmer Switch
The dimmer switch (31) is located on the left bottom side of
the front console. The switch controls the brightness of the
gauge lights.
NOTE:
The headlight switch (21) must be in the center or
top position before gauge lights will illuminate and
the dimmer switch becomes functional.
Headlights Dimmer Switch
The headlights dimmer switch (47) is incorporated in the turn
signal switch. It is located on the left side of the steering
column. The switch is activated by pulling or pushing the turn
signal lever toward you or away from you.
Turn Signal Lever
The turn signal lever (47) is located on the steering column.
Positioning the lever down causes the indicator light on the
console and the left front and left rear signals to flash.
Positioning the lever up causes the indicator light on the
console and the right front and right rear signals to flash.
Cruise Control
The cruise control (47) is incorporated in the turn signal lever
located on the left side of the steering column. Push the
switch to ON to turn the cruise control on. Accelerate to
desired speed and push (SET COAST) button on end of
lever.
If cruise is stopped by braking and switch is still positioned to
ON, the switch can be pushed to (RESUME-ACCEL) to
resume cruise speed. Position switch to OFF to turn the
cruise control off.
Hazard Light Switch
The hazard light switch (55) is located on the steering
column. Pulling on the switch (in the direction of the arrow)
causes all the turn signals and the indicator lights on the
console to flash.
Left Turn Signal Indicator
The left turn signal indicator (3) is located on the top left side
of the front console. It is a green indicator light that flashes
when the turn signal lever is pulled down or the hazard
switch is activated.
Right Turn Signal Indicator
The right turn signal indicator (6) is located on the top right
side of the front console. It is a green indicator light that
flashes when the turn signal lever is pushed up or the hazard
switch is activated.
Steering Column Tilt/Telescope Lever
The steering column tilt/telescope lever (56) is located on the
steering column behind the turn signal lever. Pulling back on
the lever allows the steering column to be tilted, and pushing
forward on the lever allows the steering column to be
telescoped in and out.
Horn Button
The horn button (46) is located in the center of the steering
wheel (45). Depressing the horn button energizes the circuit
sounding the horn.
Fire Extinguisher
The fire extinguisher (43) is mounted on the left inside rear of
the cab.
Cab Circulating Fan
The cab circulating fan (50) is mounted on the left front of the
cab and is controlled by a two speed rocker switch on the
base of the fan.
Tire Inflation Switch
The tire inflation switch (18) is located on the left side of the
front console. It is a two position switch that activates the tire
inflation system. Push the top of the switch to activate the tire
inflation system. An amber indicator will illuminate and the
warning buzzer will sound when the switch is in the on
position.
12 V
DC
Accessory Outlet
The 12 V
DC
accessory outlet (9) is located on the right side
console. It provides an outlet for the operator to plug in a 12
V
DC
accessory. This outlet should be used only for
components requiring 3 amps or less.
Cab Dome Light (Not Shown)
The cab dome light (44) is located in the center of the cab
roof directly over the seat. It is controlled by a switch on the
light and by a door switch that powers the light when the cab
door is opened.
Air Horn (Not Shown)
A set of air horns are mounted on top of the cab and are
controlled by a valve manually actuated by a cable inside the
cab.
Fuse and Relay Panel (Not Shown)
The fuse and relay panel (54) is located in the rear right side
of the cab underneath a removable cover. It contains 12
fuses used to protect cab wiring, 3 relays to control the wiper
and heater motor, the cab warning buzzer and the electrical
system diagnostic connector.
Engine ECM Diagnostic Connector
The engine ECM diagnostic connector (39) is located on the
left side of the cab beneath the front console. It is used for
servicing the engine ECM.
Reference Only
