Manitowoc Grove GMK 4100L-1, Operating Manual

Page: 930 / 1016

Malfunctions during crane operation
14.4 Troubleshooting
14 - 14 3 302 690 en Operating manual
GMK4100L-1
2
3
.1
1.
201
7
Only the lowering func-
tion works Lifting limit switch
approached, lamp lights up Leave the shutdown
range and lower the hoist.
RCL shutdown, lamp lights up Leave the shutdown
range;
à
p. 11 - 58
Control unit fuse blown Replace the blown fuse;
à
p. 14 - 73
Lifting, lowering or high-
speed mode function not
working Function disabled by CCS If required, acknowledge
error message once and
briefly turn off the ignition
– it if occurs again, notify
Manitowoc Crane Care
No lift function Control unit fuse blown Replace the blown fuse;
à
p. 14 - 73
Lifting or lowering is
either not possible at all
or only at a low speed Speed limited Increase limit;
à
p. 11 - 125
Lifting or lowering func-
tion cannot be switched
off CCS malfunction Emergency stop switch;
à
p. 14 - 1
No response to control
lever movements CCS malfunction for operat-
ing elements in the crane cab Unrig using hand-held
control;
à
p. 14 - 45
Malfunction Cause Solution