Manitowoc Grove GMK 4100L-1, Operating Manual

Page: 236 / 1016

Driving
5.1 Before driving
5 - 22 3 302 690 en Operating manual
GMK4100L-1
2
3
.1
1.
201
7
The different time groups are shown with the following symbols:
Driving times : As soon as the vehicle starts to move, the tachograph auto-
matically switches to the symbol for driver 1 driving time.
If there are two diagram sheets inserted, the tachograph automatically
switches to stand-by time for two-drivers operation.
Working hours : For all other work, the same activities apply as for stand-by
time.
When setting the working hours and stand-by time, observe the applicable
local regulations for the country in which you are working.
Stand-by time : Periods of presence at the truck crane, e.g. crane operation,
maintenance work, passenger time, etc.
Breaks and periods of rest : These times are prescribed by law and must be
observed.
H
If the drivers swap during two-driver operation , the diagram sheets in the
trip recorder also have to be changed. The driving time is always recorded
on the diagram sheet which is on the isolating plate (driver 1).
H
In single-driver operation , the symbol for resting must always be set for
driver 2 otherwise an error message will appear.