Manitowoc Grove GMK 4100L-1, Operating Manual

Page: 382 / 1016

Malfunctions in driving mode
8.5 Emergency operation and breakdown assistance
8 - 28 3 302 690 en Operating manual
GMK4100L-1
2
3
.1
1.
201
7
8.5.2
Battery charger
Prerequisites – The engine must not be running and must be secured against
unauthorised use.
– An external 230 V mains power supply must be available at the location.
– The location must be well ventilated and protected against moisture.
Connecting
•
Insert plug ( 1 ) in socket ( 2 ).
•
Place the battery charger ( 5 ) in a protected
place where you can see the indicator
lamp (
3 ).
The battery charger can be suspended from
the ring eyes (
4 ).
•
Insert the plug ( 6 ) into the socket on the
mains supply 230 V at the location.
The battery charger switches on. The lamp ( 3 )
on the battery charger indicates the status:
Breaking
•
Withdraw the plug ( 3 ) from the socket.
•
Take out the plug ( 1 ) from the socket ( 2 ).
•
Close the socket ( 2 ).
•
Return the battery charger to the storage
compartment in the driver's cab.
G
Risk of explosion when operating the battery charger!
The battery charger may not be operated:
– At service stations and tank farms.
– At places where flammable gases or vapours can be found or formed
(e.g. at places where fuel is stored and in chemical factories).
– At places where explosive dust can be found or formed (e.g. carbon dust,
wood dust and grain dust).
– Flashing: The battery is being charged
– On: Charging complete