manualshive.com logo in svg

Manitowoc Grove GMK 4100L-1, Operating Manual

Share
Download
Manitowoc Grove GMK 4100L-1 Operating Manual Download Page 329

Driving modes

6.5 Installing/removing the outrigger beams

Operating manual

3 302 690 en

6 - 29

GMK4100L-1

2

3

.1

1.

201

7

 6.5         

Installing/removing the outrigger beams

To rig the outrigger beams, the outriggers must be fitted with hydraulic 
connections (

1

) which can be separated.

During rigging, each outrigger beam is removed and mounted as a com-
plete “package”, consisting of inner and outer outrigger beams, cylinders 
and add-on parts.

You will require the following equipment with a sufficient load bearing 
capacity:

– An auxiliary crane

– Suitable lifting gear and guide ropes,

– A chain hoist,

– A separate vehicle.

Dimensions and weights of the outrigger beams; 

à

p. 1 - 10. 

G

Risk of truck crane overturning if not properly supported!

Loads may only be lifted when the truck crane is supported on all outrigger 
beams. The lifting capacity tables for the 

Free on wheels

 operating position 

are not designed

 for installation and removal of the outrigger beams.

For this reason, always use an auxiliary crane for installation and removal 
of the outrigger beams.

Summary of Contents for Grove GMK 4100L-1

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands