Manitou STACKY 10 FR D28, Operator'S Manual

Page: 46 / 60

3-10
Maintenance - STACKY 2012.12
A8 - CONDITION AND ATTACHMENT OF FORK OR TOOL (except STACKY 14)
CHECK
The fork or tool must not show any visible signs of damage, such as: deformation, cracking or heavy wear .
The fork or tool must be securely attached to avoid any risk of accident . Check the tightening of the two screws holding the fork
or the tool on the carriage .
A9 - TILLER ARM AUTOMATIC RETURN TO VERTICAL POSITION
CHECK
Place the tiller arm in the horizontal position and release it . It must automatically return to the vertical position .
A10 - BUTTERFLY CONTROL SWITCHES RETURN TO NEUTRAL POSITION
CHECK
Operate the stacker butterfly control switches in forward and reverse directions . They must return to the neutral position .
A11 - EMERGENCY STOP BUTTON
CHECK
Operate the emergency stop button with key switch is in the ON position . The electrical power supply must be switched off and
thus any travel, raise and lower movements . The battery charge indicator light must go out .
A12 - HORN
CHECK
Check the operation of the horn by pressing the button on the tiller arm .
A13 - ANTI-CRUSHING SAFETY DEVICE
CHECK
The anti-crushing safety device is situated on the end of the tiller arm . The button is red . Start the stacker moving and press the
safety button . The direction of travel must be reversed for a few moments before the stacker comes to a halt .