2-33
13 - FORWARD/NEUTRAL/REVERSE GEAR SELECTION
When operating this control, the lift truck should be traveling at slow speed and not accelerating.
FORWARD: Lift slightly and push the lever forwards (position A).
REVERSE: Lift slightly and pull the lever backwards (position B).
NEUTRAL: To start the lift truck, the lever must be in neutral (position C).
NOTE: As an OPTION, reversing lights and an acoustic reversing alarm indicate that the lift truck
is running in reverse.
SAFETY FOR MOVING THE LIFT TRUCK
Authorization to move the lift truck is controlled by an electronic unit. The operator must
observe the following sequence to move the truck forwards or backwards:
1 - sit down correctly in the driver’s seat,
2 - release the parking brake,
3 - engage forward or reverse movement.
To stop the lift truck, he must observe the following sequence:
1 - set the forward/reverse selector to neutral,
2 - engage the parking brake,
3 - get out of the lift truck.
NOTE: If the operator leaves the driving cab with forward or reverse engaged, a continuous alarm will sound. While this alarm sounds,
the operator can simply sit back in the seat and continue advancing or reversing.
If the alarm becomes discontinuous, the operator must sit back in the seat, put the selector back in neutral and select forward
or reverse if he wishes to continue moving.
14 - HYDRAULIC CONTROLS
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the
event of suspected malfunction, contact your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL
AND VOID.
Use the hydraulic controls carefully and smoothly, to avoid accidents caused by shaking the lift truck.
Using the hydraulic controls is only possible if the driver is present and correctly sat on his seat.
Otherwise, the hydraulic controls are blocked.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
NOTE: The engine r.p.m. automatically increases when lifting the load.
TILTING THE MAST
- The lever A to the left for backward tilting.
- The lever A to the right for forward tilting.
ATTACHMENT
- Lever B forward or backward.
15 - DOCUMENT CLIP
16 - DOCUMENT HOLDER NET
Make sure that the operator’s manual is in the right place, i.e. in the document holder net.
NOTE: OPTION a waterproof document-holder exists.
17 - WINDSCREEN WASHER TANK
See: 3 - MAINTENANCE: B - EVERY 50 HOURS SERVICE.
A
C
B
B
A
647448
(20/05/2015)
Summary of Contents for MH20-4 T BUGGIE 4ST3B
