
2-41
9 - FINTRONIC ANTI-START SYSTEM
OPERATION
- Switch on the lift truck and set the black key A next to the antenna B (maximum 80 mm).
- Wait a few seconds for red led C to go out before starting the lift truck.
NOTE: You can restart the lift truck within 20 seconds of stopping it: after this time, the anti-start
system reacts and LED C flashes red.
10 - MODCLÉ ANTI-THEFT SYSTEM
OPERATION
- Use the black key on the anti-theft system unit 1, the yellow indicator 2 will briefly light up.
Once the key is recognized, the green light 3 will remain continuously on.
- Start the lift truck within the next 60 seconds; otherwise the anti-theft system will be reactivated
and the red indicator lamp 4 will flash.
NOTE: After the engine has been switched off, the anti-theft system will remain disabled for
20 seconds. Beyond this time, it will be reactivated and the red indicator lamp will flash.
If the key is not recognized, all the indicator lamps will flash alternately. Check that the key
matches the lift truck's anti-theft system.
If the anti-theft system is blocked, the lift truck can only be started with the PASS key.
In the event of a fault, consult your dealer.
11 - ADAPTATION OF 4TH ELEMENT OF SINGLE- OR DOUBLE-ACTING DISTRIBUTOR
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
NOTE: The engine r.p.m. automatically increases when lifting the load.
TILTING THE MAST
- The lever A to the left for backward tilting.
- The lever A to the right for forward tilting.
ATTACHMENT
- Lever B forward or backward.
ADDITIONAL ATTACHMENT
- The lever C forwards or backwards.
12 - IN LINE DISTRIBUTOR 3 ELEMENT ADAPTATION
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
NOTE: The engine r.p.m. automatically increases when lifting the load.
TILTING THE MAST
- The lever B backward for backward tilting.
- The lever B forwards for forward tilting.
ATTACHMENT
- The lever C forwards or backwards.
C
B
A
C
A
B
A
B
C
1
2
4
3
647448
(20/05/2015)
Summary of Contents for MH20-4 T BUGGIE 4ST3B
