Manitou MH20-4 T BUGGIE 4ST3B, Operator'S Manual, Page: 64 / 114

2-42
13 - IN LINE DISTRIBUTOR 4 ELEMENT ADAPTATION
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
NOTE: The engine r.p.m. automatically increases when lifting the load.
TILTING THE MAST
- The lever B backward for backward tilting.
- The lever B forwards for forward tilting.
ATTACHMENT
- The lever C forwards or backwards.
ADDITIONAL ATTACHMENT
- Lever D forwards or backwards.
14 - INCHING HYDRAULIC TRANSMISSION CUT-OFF ADAPTATION
MSI20 T 4ST3B MSI25 T 4ST3B
MSI30 T 4ST3B MSI35 T 4ST3B
This pedal operates in two steps:
- First, the pedal acts upon a hydraulic valve which progressively cuts off the hydrostatic
transmission so as to carry out a slow approach with full engine power.
- The pedal then acts upon a hydraulic valve which progressively lowers the pressure in the
brakes so as to bring the lift truck to a complete stop.
15 - FOOT OPERATED FORWARD/REVERSE SWITCH ADAPTATION
The lift truck must be stationary when operating the forward/reverse pedal.
FORWARD: Press the pedal 1 on the right.
REVERSE: Press the pedal 2 on the left.
NEUTRAL: To start the lift truck, do not press the reverse pedals.
1
2
C
B
D
A
647448
(20/05/2015)